Flash Download Configuration Screen Field Descriptions - Enterasys 6E2xx Local Management User’s Manual

FLASH Download Configuration Screen
Table 5-9 Flash Download Configuration Screen Field Descriptions
Use this field...
Download Method
(Selectable)
5-34 Module Configuration Menu Screens
To...
Select a method (RUNTIME, DOWNLOAD CONFIG, or UPLOAD
CONFIG) to download (receive) an image file from a TFTP server, or
upload (transmit) or download a configuration file to/from a TFTP
server. The uploading and downloading of a configuration file is
accomplished according to the IP address and the file name entered in
the Download Server IP and Download File Name fields, respectively.
RUNTIME – Used to download a new image from a TFTP server.
This allows the replacement of the image file currently stored in the
switch module. Section 5.8.1
Runtime.
DOWNLOAD CONFIG – Used to download a configuration file from
a TFTP server to a switch module. The configuration file must be one
that was uploaded to the TFTP server from a switch module of the
same model with the same optional hardware, and running firmware
revision 3.10.7 or higher.
The switch module automatically reboots after a successful download.
Section 5.8.2 describes how to download a configuration file.
UPLOAD CONFIG – Used to upload a configuration file from a
switch module to a TFTP server. The configuration file must be one
that was downloaded to a switch module of the same model with the
same optional hardware, and running firmware revision 3.10.7 or
higher.
Section 5.8.3 describes how to download using TFTP.
describes how to download using