Enterasys 6E2xx Local Management User’s Manual page 344

Built-in Commands
dynamic_egress (Continued)
Example:
ev
Description:
Syntax:
12-10 Network Tools Screens
-> dynamic_egress status 1
Dynamic Egress Disabled for VLAN ID 0x0001
-> dynamic_egress enable 1
Dynamic Egress Enabled for VLAN ID 0x0001
-> dynamic_egress disable 1
Dynamic Egress Disabled for VLAN ID 0x0001
Enables and disables groups of events or all events concerning logging
functions.
Enable [Group]
Disable [Group] [Trap] [#|ALL]
Commands to Control Logging Functions:
ev STARt [Logging] [Trapping] – begin logging events/
ev STOp [Logging] [Trapping] – stop logging events/trap
ev Clear – clear the log
ev SEverity <severity level> – set/show current logging severity
ev filter [get | set <string>] – get/set search string
ev logsize [get|set <#(50-5000)>] – get/set dynamic log buffer size
Commands for Listing Events:
ev List [ENabled] [GROUPS|Traps|EVents|Log] – list various items
If the argument enabled is used, then only the enabled events, traps,
or groups are listed.
ev List GROUP_Event # – list events for group #
Commands for Miscellaneous Log/Event Functions:
ev STus – status of log system
ev SCreensize [#] – set # of listed events/screenful#