Examples; Walkthrough Stage Four, Vlan Port Configuration - Enterasys 6E2xx Local Management User’s Manual

Figure 13-9 Walkthrough Stage Four, VLAN Port Configuration
This effectively completes the configuration of a single VLAN, assigning it to a port, and
configuring the switch to forward the frames received on that port to a trunk port. The trunk port in
turn forward the frames as tagged to another switch.
You can now use the VLAN Classification Configuration and Port Protocol Configuration screens
to transmit frames according to classification rules and associated ports, as described in

13.11 EXAMPLES

NOTE: Due to the complexity of Local Management, the following simple examples and
are not meant to cover the full potential of Local Management.
The following sections provide some examples of how VLAN-aware SmartSwitches can be
configured to group users at the port level to create VLANs in existing networks. Each example
presents a problem and shows how it is solved by configuring the switches using the VLAN Local
Management screens. The actual procedures and screens used to configure a VLAN-aware switch
are covered in Chapter
the frames transmitted from one user would traverse the network to its target device.
8. Also provided in the discussion of each example is a description of how
VLAN Operation and Network Applications
Examples
Chapter 8.
13-21