Enterasys 6E2xx Local Management User’s Manual page 367

stpRealTimeMsgAge
Description:
Sets the BPDU MESSAGE AGE time mechanism to either IEEE or REAL
TIME.
Syntax:
stpRealTimeMsgAge [ enable | disable | status ]
Options:
enable – Enables the BPDU MESSAGE AGE time mechanism.
disable – Disables BPDU MESSAGE AGE time mechanism.
status – Shows status of the BPDU MESSAGE AGE time mechanism.
Example:
stpRealTimeMsgAge disable
disabled
stpStandby
Description:
Allows the user to control the behavior of the Spanning Tree Protocol (STP)
during link state change. The user may enable, disable, or see the status of the
stpStandby. The enable command causes the STP to go through the standby
states for the port that received a valid link. The disable command causes the
STP to stay in the forwarding state regardless of the link state change.
Syntax:
stpStandby [enable/disable/status]
Options:
None
Example:
-> stpStandby status
Disabled.
-> stpStandby enable
-> stpStandby status
Enabled.
-> stpStandby disable
-> stpStandby status
Disabled.
->
Built-in Commands
Network Tools Screens 12-33