Enterasys 6E2xx Local Management User’s Manual page 92

EAP Statistics Menu Screen
Table 3-14 EAP Authenticator Statistics Screen Field Descriptions (Continued)
Use this field...
Response Id Frames
Rx
(Read-Only)
Response Frames
Rx
(Read-Only)
Request Id Frames
Tx
(Read-Only)
Request Frames Tx
(Read-Only)
Invalid Frames Rx
(Read-Only)
Length Error
Frames Rx
(Read-Only)
Frame Version
(Read-Only)
Frame Source
(Read-Only)
Port Number
(Selectable)
CLEAR
COUNTERS
(Command)
3-50 Accessing Local Management
To...
See counts of EAP response identification type frames received by the
authenticator.
See counts of EAP response type frames received by the authenticator.
See counts of EAP request identification type frames transmitted by the
authenticator.
See counts of EAP request identification type frames transmitted by the
authenticator.
See counts of frames received by the authenticator that have an
unrecognizable frame type.
See counts of frames received by the authenticator with an invalid
length field for the frame body,
See the EAP protocol version present in the most recent EAP frame.
See the source MAC address for the most recent EAP frame received.
Select the port number to display the associated EAP Authenticator
Statistics. To select a port number, use the arrow keys to highlight the
Port Number field. Then step to the correct port number using the
SPACE bar and press ENTER to display the associated port EAP
Authenticator Statistics.
Set the octets and frame counters to zero for a particular port. To clear
the counters, highlight CLEAR COUNTERS and press ENTER.
NOTE: This command clears the counters for this LM
screen, but it does not clear the associated MIB objects.