Enterasys 6E2xx Local Management User’s Manual page 353

passiveStp
Description:
Allows management of PassiveStp on this device. The user may
enable/disable or see the current status of PassiveStp.
Passive Mode Spanning tree allows ports on leaf bridges to transition very
quickly and not invoke a global network re-span through requesting root
elections by:
•
•
•
•
•
Syntax:
passiveStp [ enable | disable | status ]
Options:
enable – Enables PassiveStp on this device.
disable – Disables PassiveStp on this device.
status – Indicates the current status of Passive STP.
Example:
->PassiveStp disable
Disabled
->PassiveStp status
Passive is disabled
Passive Maxage = 2000
ping
Description:
Generates an outbound ping request to check the status (alive/not alive) of a
device at a specified IP address.
Syntax:
ping [IP address]
Options:
None
Example:
-> ping 122.144.40.10
122.144.40.10 is alive
Not allowing switches to become the root node;
Not allowing switches to send configuration BPDUs;
Expiring the message age timer when a link transitions to a down state;
Moving the 802.1D Blocked state directly to forwarding; and
Using a default or locally defined Passive STP Max Age time.
Built-in Commands
Network Tools Screens 12-19