Enterasys 6E2xx Local Management User’s Manual page 352

Built-in Commands
netstat
Description:
Syntax:
Options:
Example:
-> netstat -i
Interface + DescriptionMTU
#1 (ethernet - csmacd) 1514 10000000 up
#2 (ethernet - csmacd) 1514 10000000 up
#3 (ethernet - csmacd) 1514 10000000 up
#4 (ethernet - csmacd) 1514 10000000 up
-> netstat -r
Destination
# Default Route
# 134.141.0.0
# 134.141.0.0
non_bridge_if_num
Description:
Syntax:
Options:
Example:
12-18 Network Tools Screens
Provides a display of general network statistics for the managed device. The
netstat command must be used with one of the following two display options.
netstat [option]
-i – Displays status and capability information for each interface.
-r – Displays routing information for each interface.
Speed
Next-hop
DirectConnection 1
DirectConnection 2
DirectConnection 3
Allows configuration of the interface number assigned to non-bridge ports.
Current settings allowed are 0 or 9999. Changing of the interface number
assigned to non-bridge ports will lead to a reset of the board.
non_bridge_if_num [ 0 | 9999 | status ]
None
->non_bridge_if_num_status
Admin Oper MAC Addr
up 0x00 0x00 0x1d 0x07 0x50 0x0e
up 0x00 0x00 0x1d 0x07 0x50 0x0f
up 0x00 0x00 0x1d 0x07 0x50 0x10
up 0x00 0x00 0x1d 0x07 0x50 0x11
Interface