Ad Aggregator Screen Field Descriptions - Enterasys 6E2xx Local Management User’s Manual

Table 6-11 802.3ad Aggregator Screen Field Descriptions
Use this field...
AggInst
(Read-Only)
OperKey
(Read-Only)
SysPri
(Read-Only)
NumPorts
(Read-Only)
Viewing and Editing 802.3ad Aggregator Parameters
To view or change Aggregator parameters, proceed as follows:
1. Use the arrow keys to highlight the parameter field to be modified and type in the new value.
Press ENTER. Repeat this step to change other parameter settings as necessary before saving the
new settings.
2. Use the arrow keys to highlight the SAVE command at the bottom of the screen.
3. Press ENTER. The message "SAVED OK" displays. All settings are saved.
Displaying Aggregator Details
To display detail information about an Aggregator, proceed as follows:
1. Use the arrow keys to highlight the line containing the Aggregator of interest.
2. Press ENTER. The 802.3ad Aggregator Details screen, described in
showing the details of the selected Aggregator.
Link Aggregation Screen (802.3ad Main Menu Screen)
To...
See dot3adAggIndex, a unique number that identifies this aggregator.
See dot3adAggActorOperKey, the associated operational key value.
See dot3adAggActorSystemPriority, the priority value associated with
this aggregator.
See the number of ports that are currently attached to this aggregator.
Section
Port Configuration Menu Screens
6.8.2.1, is displayed
6-41