Table of Contents
Advertisement
3. Press ENTER. If the default gateway entered is in the correct format, the cursor returns to the
beginning of the Default Gateway field. If the format is not correct, the screen displays
"INVALID DEFAULT GATEWAY OR FORMAT ENTERED". Local Management does not
alter the current value, but it does refresh the Default Gateway field with the previous value.
4. Use the arrow keys to highlight the SAVE command.
5. Press ENTER. The message "SAVED OK" displays at the top of the screen.
5.2.4
Setting the TFTP Gateway IP Address
If the network TFTP server is located on a different IP subnet than the switch module, a Gateway
IP address should be specified. To set the TFTP Gateway IP address, perform the following steps:
1. Use the arrow keys to highlight the TFTP Gateway IP Addr field.
2. Enter the IP address of the TFTP gateway using the DDN format.
For example: nnn.nnn.nnn.nnn
3. Press ENTER. If the TFTP gateway IP address entered is a valid format, the cursor returns to the
beginning of the TFTP Gateway IP Address field. If the entry is not valid, the screen displays
"INVALID TFTP GATEWAY IP ADDRESS OR FORMAT ENTERED". Local Management
does not alter the current value, but it does refresh the TFTP Gateway IP Address field with the
previous value.
4. Use the arrow keys to highlight the SAVE command.
5. Press ENTER. The message "SAVED OK" displays.
General Configuration Screen
Module Configuration Menu Screens
5-11
Advertisement
Table of Contents
