Displaying Rmon Statistics - Enterasys 6E2xx Local Management User’s Manual

Table 11-4 RMON Statistics Screen Field Descriptions (Continued)
Use this field...
512 – 1023 Octets
(Read-Only)
1024 – 1518 Octets
(Read-Only)
Index [nn]
(Command)
CLEAR
COUNTERS
(Command)

11.4.1 Displaying RMON Statistics

To display the statistics for any index, proceed as follows:
1. Use the arrow keys to highlight the Index [nn] field at the bottom of the screen.
2. Press the SPACE bar to increment (or press the DEL [delete] key to decrement) the index
number (number of the port interface).
3. Press ENTER (neither the RMON Index field nor the statistics will change until ENTER is
pressed). The RMON interface index of statistics for the port is displayed.
To...
See the total number of frames, including bad frames, received that
were between 512 and 1023 bytes in length (excluding framing bits,
but including FCS bytes).
See the total number of frames, including bad frames, received that
were between 1024 and 1518 bytes in length (excluding framing bits,
but including FCS bytes).
Enter a port number to view its statistics. For instructions on how to use
this command, refer to
Temporarily reset all counters of a screen to zero to allow you to
observe counter activity over a period of time. For details on how to use
this command, refer to
Section 11.4.1.
Section 3.1.4.
Module Statistics Menu Screens
RMON Statistics Screen
11-13