Table of Contents
Advertisement
Field Descriptions
Refer to
Table 3-2
for a functional description of each screen field.
Table 3-2 Module Selection Screen Field Descriptions
Use this field...
Module #
(Selectable)
Module Type
(Read-Only)
Serial #
(Read-Only)
Hardware Revision
(Read-only)
3.4.1
Selecting a Module
To select an individual module to perform Local Management functions, proceed as follows:
1. Use the arrow keys to highlight the desired module number in the Module # field.
2. Press ENTER, the applicable Module Menu screen displays. Proceed to
To...
Display the slot in which the module is installed. The module number
enclosed in angle brackets (< >) indicates the module to which the
management terminal or Telnet session is currently connected.
Display the type of interface module that is installed in each slot.
Display the serial number of the module. The serial number of the
device is necessary when calling Enterasys Networks concerning the
module.
Display the hardware version of the module.
Module Selection Screen
Section
Accessing Local Management
3.5.
3-11
Advertisement
Table of Contents
