Table of Contents
Advertisement
Figure 13-6 Walkthrough Stage One, Static VLAN Configuration Screen
Assigning Ports to the VLAN Egress list
1. Use the arrow keys to highlight the line in the list that has VLAN ID 2. As shown in
the Static VLAN Egress Configuration screen displays showing all ports.
It is now time to assign a port to this new VLAN.
NOTE: When a Static VLAN is created, all ports on the Static VLAN Egress
Configuration screen are set to the default setting of NO for that VLAN. This means that
none of the ports are on the Egress list for that VLAN and will not transmit its frames.
2. Use the arrow keys to highlight the Egress field of Port 3.
NOTE: For the purposes of this walkthrough, Port 3 will be configured. As this port will
connect to a single workstation, and is not to be used for switch-to-switch
communications, the Egress will be set to UNTAGGED.
3. Use the SPACE bar to step to UNTAGGED.
VLAN Operation and Network Applications
Quick VLAN Walkthrough
Figure
13-6,
13-17
Advertisement
Table of Contents
