Sending Faxes With Multiple Settings; Manual Transmission; Automatic Transmission; Manual And Automatic Fax Redial - Brother FAX4750 Service Manual

If you send faxes from a computer on the same phone line and your Brother
machine intercepts them, set Easy Receive to OFF.

Sending Faxes with Multiple Settings

When you send a fax you can choose any
combination of the available settings: add
a coverage and select a comment; set the
contrast or resolution; send using overseas
mode, call reservation or delayed fax timer,
polling transmission or real time transmission. After each function is
accepted, the display will ask if you want to enter other settings:
Press if you want to select additional settings. The display returns to the
1
SETUP SEND menu—OR—
Press if you are finished choosing settings, and go to the next step.
2

Manual Transmission

Manual transmission lets you hear the dial tone, ringing and fax receiving
tones before sending the fax.
1
Insert the document face down in the feeder.
2
Pick up the handset and listen for a dial tone—OR—
Press and listen for a dial tone.
Hook
3
Enter the fax number you want to call (you can enter the digits using the dial
pad, or you can enter a One Touch or Speed Dial number or you can call from
the Tel-index).
(See One Touch Dialing, page 8-1.)
4
When you hear the fax tone, press
5
If you're using the handset, hang up.

Automatic Transmission

This is the easiest way to send a fax. IMPORTANT: Do not pick up the
handset, or press
1
Insert the document face down in the feeder.
2
Enter the fax number using One Touch, Speed Dial, Tel-index or the dial pad.
(See Speed Dialing, page 8-2.)
3
Press .
Start

Manual and Automatic Fax Redial

If you're sending a fax manually and the line is busy, after you disconnect the
call press
Redial/Pause
If you're sending a fax automatically and the line is busy, the machine will
redial automatically, up to three times at 5 minute intervals.
6 - 2 S E T U P S E N D
Start
Hook .
to retry the number.
ACCEPTED
OTHER SETTINGS?
1.YES 2.NO
.