Programming
5.4 Activating the needle thread clamp
Before the first start of a seam program, the needle thread clamp must be
activated to protect the needle thread from being pulled out of the needle
when the machine cycle starts.
To activate the needle thread clamp:
1. Open the submenu Thread clamp
and press the F6 key.
5.5 Initializing the day counter
Use this function to reset the day counter for a program cycle or for a com-
pleted work process to zero.
To reset the day counter to zero:
1. Move to level 1.
2. Press the F1 key.
The display shows the icons of the functions that can be selected on
this level:
.
3. Open the submenu Day counter
and press the F6 key.
The day counter has been reset to zero.
4. Return to the start level.
5. Press the F1 key.
The display shows the message PART: 0000.
48
Operating Instructions 2112-5 - 00.0 - 02/2020