Sewing On The Pocket Facing - Beisler 2112-5 Operating Instructions Manual

Operation

4.3.1 Sewing on the pocket facing

The machine allows for the automatic edge folding of pocket facing and for
sewing pocket facing onto a pocket bag.
Depending on the way how the pocket facing and the pocket bag are
supposed to be sewn together, the two sewing pieces must be aligned
with one another at the line-up positions.
The exact line-up position of pocket bag and pocket facing is marked on
the working plate / the pick-up plate with strips of adhesive tape or a felt
pen. While doing so, make sure the pocket bag is positioned in the oper-
ating range of the pocket bag clamp.
Positioning and aligning
Fig. 3: Sewing on pocket facing (1), positioning and aligning
(1) - Revolver
The stitch width depends on the thickness of the fabric. The thicker the
sewing material used, the wider the stitch width.
You use the adjusting wheel (2) to determine the maximum fabric thick-
ness of the pocket facing. The adjusting wheel is continuously adjustable.
The stitch width can be set to 4 different levels at the revolver (1), see chap-
ter Quick stitch width adjustment ( p. 32).
Operating Instructions 2112-5 - 00.0 - 02/2020
①
(2) - Adjusting wheel
②
17