HP ML570 - ProLiant - G2 Setup And Installation Manual page 130

PCI-X Technology
Use the following table to identify PCI-X Hot Plug slot activity status according to
LED description.
Table 4-6: PCI-X Expansion Slot LEDs
LED State
Power On
Fault Off
Power On
Fault On
Power Flashing
Fault On or Off
Power Off
Fault On
Power Off
Fault Off
Note: If the any of the LEDs indicates an error, refer to Appendix D, "Troubleshooting," for more
information.
4-12
OK to Open Slot Status
No Power is currently applied to the slot. Do NOT open
the expansion slot latch. The slot is functioning
normally.
No Power is currently applied to this slot, but the slot
needs ATTENTION for a possible problem with the
slot, expansion board, or driver. Do NOT open the
expansion slot latch.
No The power slot is being turned off or on, which may
take several minutes. Do NOT open the expansion
slot latch. Press the PCI Hot Plug button to cancel the
operation.
Yes Power to this slot is turned off, but this slot needs
ATTENTION. There may be a problem with the slot,
expansion board, or driver.
Yes The power to the slot is off. An expansion board may
be installed in this slot.
HP ProLiant ML570 Generation 2 Server Setup and Installation Guide