Appendix C System Leds And Switches; System Leds - HP ML570 - ProLiant - G2 Setup And Installation Manual

This appendix provides information about locating and using system LEDs and
switches in the server. For additional information about troubleshooting procedures,
refer to Appendix D, "Troubleshooting."

System LEDs

The server contains LEDs that indicate the status and settings of hardware
components. This section discusses the following types and locations of LEDs:
•
Front panel
•
System board
•
Memory board
•
PCI-X Hot Plug
•
Expansion slot speed
•
Hot-plug power supply
•
Hot-plug fan
•
Embedded NIC connector (RJ-45)
•
Rear UID (Unit Identification LED)
•
Hot-plug hard drive
Information at the end of this section discusses the interactions between front panel
and system LEDs in troubleshooting or assessing system status.
HP ProLiant ML570 Generation 2 Server Setup and Installation Guide
System LEDs and Switches
C
C-1