The server ships with two hot-plug power supplies. The following procedures show
you how to install an optional hot-plug power supply for redundancy.
To install the redundant hot-plug power supply:
1. Locate the power supply blank at the rear of the server beneath the system
tray (3).
Figure 3-42: Hot-plug power supplies
(rack configuration)
Table 3-11: Hot-Plug Power Supply Locations
Item
1
2
3
HP ProLiant ML570 Generation 2 Server Setup and Installation Guide
Power Supply
Hot-plug power supply 1
Hot-plug power supply 2
Hot-plug power supply bay 3 (redundant)
Installing Hardware Options
3-49