Remote Insight Lights-Out Edition - HP ML570 - ProLiant - G2 Setup And Installation Manual

Cabling the Server

Remote Insight Lights-Out Edition

The following illustration shows the cable routing from the Remote Insight board to
the system board. Use the cable to connect the connector on the expansion board (1)
to the 30-pin or 16-pin remote management connector on the system board (2).
Check the cable that ships with your Remote Insight board to determine which
connector to use. Refer to Table 7-1 to locate the remote management connectors on
the system board.
Figure 7-6: Cable routing of the Remote Insight
Lights-Out Pro (30-pin)
7-10 HP ProLiant ML570 Generation 2 Server Setup and Installation Guide