HP ML570 - ProLiant - G2 Setup And Installation Manual page 66

6. Remove the front processor air baffle:
a. Loosen the two thumbscrews that secure the air baffle to the system tray (1).
b. Lift the air baffle up out of the server (2).
Figure 3-19: Removing the front processor air baffle
7. If necessary, remove the memory board in slot 2 to gain access to the processors.
For detailed information on removing a memory board, refer to the server
memory installation guide on the Documentation CD.
HP ProLiant ML570 Generation 2 Server Setup and Installation Guide
Installing Hardware Options
3-25