Installing the Tower Server
Use the following figure and table to identify connectors on the rear panel of the
tower server.
Figure 6-2: Rear panel connectors and components
(tower server)
Table 6-1: Rear Panel Connectors and Components (Tower Server)
Item
Description
1
Keyboard connector
2
Mouse connector
3
Serial connector A
4
Parallel connector
5
Embedded NIC connector (RJ-45)
6
Release latch
7
VHDCI SCSI connector *
8
PCI-X Hot Plug expansion slots
9
PCI-X non-hot plug expansion slots
* In the standard shipping configuration, the VHDCI SCSI connector is not connected. To connect
the VHDCI SCSI connector, refer to "External Devices" in Chapter 3, "Installing Hardware Options."
6-4
Item
10
11
12
13
14
15
16
17
HP ProLiant ML570 Generation 2 Server Setup and Installation Guide
Description
Hot-plug power supply 1
Hot-plug power supply 2
Torx T-15 tool
Unit Identification (UID) switch and LED
USB connectors
Video connector
Serial connector B
Hot-plug power supply 3 (redundant)