HP ML570 - ProLiant - G2 Setup And Installation Manual page 114

Installing the DVD Drive in the CD-ROM Drive Bay
To install a DVD drive in place of the CD-ROM drive:
1. Remove the CD-ROM drive. Refer to "Removing the CD-ROM Drive to Install a
DVD Drive" in this chapter.
2. Insert the DVD drive into the front of the chassis (1).
3. Slide the metal locking bracket toward the fans (2).
4. Tighten the thumbscrew near the bottom of the CPU fan basket (3).
Figure 3-64: Installing a DVD drive in the CD-ROM drive
bay
HP ProLiant ML570 Generation 2 Server Setup and Installation Guide
Installing Hardware Options
3-73