HP ML570 - ProLiant - G2 Setup And Installation Manual page 105

Installing Hardware Options
7. Remove the rails from one of the removable media bay blanks by removing all
four Torx T-15 screws in the rails. Note that the orientation of the left rail is the
reverse of the orientation of the right rail.
Figure 3-54: Removing the removable media bay blank
rails
8. Affix the rails to the SCSI or IDE device. Be sure to orient the rails properly.
Figure 3-55: Affixing the removable media bay blank
rails to a SCSI or IDE device
3-64 HP ProLiant ML570 Generation 2 Server Setup and Installation Guide