Removing The Power Supplies - HP ML570 - ProLiant - G2 Setup And Installation Manual

Installing the Rack Server

Removing the Power Supplies

To make moving and lifting the server more manageable, HP recommends that all
power supplies be removed from the server.
To remove the power supplies:
1. Locate the power supplies on the rear of the server under the system tray.
Figure 5-7: Server power supplies
Table 5-1: Power Supply Locations
Item
1
2
3
5-12
Power Supply
Hot-plug power supply 1
Hot-plug power supply 2
Hot-plug power supply bay 3 (redundant)
HP ProLiant ML570 Generation 2 Server Setup and Installation Guide