Multi-Initiator Configuration Utility - HP ML570 - ProLiant - G2 Setup And Installation Manual

Server Configuration and Utilities
Refer to the Management CD for information on installing and running the Survey
Utility. After you run the Survey Utility, you can view the IML by loading the output
of the utility (typically called SURVEY.TXT) into a text viewer such as Microsoft
Notepad. The event list follows the system slot information. After you open the text
file, you can print it using the print feature of the viewer.

Multi-Initiator Configuration Utility

The Integrated Dual Channel Ultra3 SCSI Controller can be configured into
multi-initiator mode to support HP storage and clustering options needing this
feature. The Multi-Initiator Configuration Utility is available in the ProLiant
ML570 Generation 2 system ROM and is accessible directly from the CTRL-A
prompt at system startup. Refer to your option documentation for additional
information and detailed instruction on using this utility.
8-22 HP ProLiant ML570 Generation 2 Server Setup and Installation Guide