System Leds And Internal Health Led Status Combinations - HP ML570 - ProLiant - G2 Setup And Installation Manual

System LEDs and Internal Health LED Status Combinations

When the internal health LED on the front panel illuminates either amber or red, the
server is experiencing a health event. The combinations of illuminated system LEDs
and the internal health LED in the following table indicate system status.
NOTE: The system management driver must be installed in order for the internal health LED
to provide pre-failure warranty conditions.
The internal health LEDs on the front panel indicate the current hardware status and
are used to assist in initial troubleshooting. Note that in some situations,
Insight Manager 7 reports server status differently than the health LEDs because it
tracks more system attributes.
For information on troubleshooting health events indicated by the internal and
external LEDs, refer to Appendix D, "Troubleshooting," or refer to the Servers
Troubleshooting Guide included on the Documentation CD that ships with the server.
Table C-12: System LEDs and Internal Health LED Status Combinations
Internal System LED and
Color
Processor failure (amber)
PPM failure (amber)
DIMM failure (amber)
HP ProLiant ML570 Generation 2 Server Setup and Installation Guide
Front Panel Internal
Health LED Color
Red
Amber
Red
Red
Amber
System LEDs and Switches
State
•
Processor has failed.
•
Required processor is not installed in
socket 1.
•
ROM detects a failed processor during
POST.
Processor is in pre-failure condition.
•
PPM has failed.
•
PPM is not installed, but the
corresponding processor is installed.
DIMM has experienced a multi-bit error.
DIMM has reached single-bit correctable
error threshold.
continued
C-15