Syslog Profile
Save the entered data by choosing File > Save or clicking the Save icon in the window tool bar as
Step 5
required.
Close the window choosing File > Close or clicking the Close icon in the window tool bar as required.
Step 6
The window closes.
After creation of a Syslog profile, that profile may be applied to Network Elements to reuse the
configuration settings.
Applying a Syslog Profile
To apply a Syslog Profile, follow these steps:
Launch the Syslog Management window by performing one of the following:
Step 1
•
•
•
The Syslog Management window appears displaying the Configuration tab.
Figure 12-4 Syslog Management Window
Cisco Catalyst Switch Manager User Guide
12-8
Right–click a Site object within the Network or Physical containment views, then choose
CSM/7600 Manager > Logical > Software > Syslog.
Right–click a Network Element object within the Network or Physical containment views, then
choose Logical > Software > Syslog.
Right–click a Software object within the Physical containment view, then choose Syslog.
Chapter 12
Profile Management
OL-4930-01