Edit Distribution List Table; Additional Notes Tab - Cisco WS-C3550-12G User Manual

Chapter 11 Routing Management
•

Edit Distribution List Table

This subarea allows changes to be made to the Distribution Table. These attributes are discussed in detail
in the
•
•
•
•
•
•
•
When adding a new distribution where the specified Protocol and Source ID do not exist on the device,
Note
it will not be rejected but a static distribution list will be created instead.

Additional Notes Tab

The Additional Notes tab of the BGP Management window contains the Notes area which is a text box
that allows you to type in additional notes.
OL-4930-01
Source ID—Identifies the routing process from which routes are being distributed. This field may
have the following values:
IS-IS—This is either an implicit null tag or the tag of a named IS-IS routing process.
–
BGP—This is a 16-bit autonomous system ID in the range of 1 to 65535.
–
EIGRP—This is a 16-bit autonomous system ID in the range of 1 to 65535.
–
– OSPF—This is a 16-bit OSPF process ID in the range of 1 to 65535.
Distribution List Tab description.
ACL ID—Unique identifier of an ACL for filtering routing updates sent/received by a routing
process.
Direction—Indicates whether the filter will be applied against routing updates received by the
routing process or advertised by the routing process.
Interface—Identifies a particular interface that the filter is applied to.
Protocol—Identifies a protocol source of network routes.
Source ID—Identifies a specific routing process instance that redistributed routes are derived from.
Add ACL Distribute—Specifies a filter for suppressing or allowing distribution of network routes
through BGP.
Delete ACL Distribute—Removes a filter for suppressing or allowing distribution of network routes
through BGP.
BGP Management Window
Cisco Catalyst Switch Manager User Guide
11-31