Cisco WS-C3550-12G User Manual page 362

OSPF Management Window
Figure 11-4 OSPF Management—Neighbor Table Configuration Window
The following areas are available on the OSPF Management—Neighbor Table Configuration
window:
Add New OSPF Neighbor Area:
The Add New OSPF Neighbor area provides the following:
Delete OSPF Neighbor Area:
The Delete OSPF Neighbor area provides the following:
Cisco Catalyst Switch Manager User Guide
11-10
– Neighbor IP Address—IP address of the neighboring router to be added to the OSPF process.
– Neighbor Cost—Cost value associated with the neighbor to be added to the OSPF process.
– Add—Adds the OSPF neighboring router to the selected OSPF process.
OSPF Neighbor Table—Lists the neighbors associated with the selected OSPF process.
–
– Neighbor IP Address—Displays the neighbor router's IP address according to the selection in
the OSPF Neighbor Table.
Neighbor Cost—Displays the neighbor router's cost according to the selection in the OSPF
–
Neighbor Table.
Remove—Deletes the neighbor selected in the OSPF Neighbor Table from the OSPF process.
–
Chapter 11 Routing Management
OL-4930-01