Virtual Server Config; Client Config; Additional Notes Tab - Cisco WS-C3550-12G User Manual

SLB Module Management Window
•

Virtual Server Config

The Virtual Server Config area allows the user to add and configure virtual servers. The following
attributes are configured:
•
•
•

Client Config

This subarea allows the user to add a client range to a virtual server definition. This action is used to
restrict which clients are allowed to connect to the virtual server. The following attributes can be
configured:
•
•
Note
•
•
•

Additional Notes Tab

The Additional Notes tab of the SLB Module Management window contains the Notes area which is a
text box that allows you to type in additional notes for the SLB.
Cisco Catalyst Switch Manager User Guide
7-28
Client Access List Table—Describes the restricted clients of a virtual server. Client ranges are
configured to permit or deny clients using the virtual server. The following columns are displayed
in the table:
Virtual Server Name field—Unique identifier of a virtual server on the device.
–
IP Address field—IP address of a virtual server restricted client range.
–
Netmask field—Subnet mask of a virtual server restricted client range. Enabled bits indicate
–
network addressing bits in the IP address.
Mode—Indicates whether or not the restricted client range defines clients that may not use the
–
virtual server.
Virtual Server Name—Unique identifier of a virtual server on the device.
Virtual Server Add—Adds the virtual server specified in the Virtual Server Name field. You need to
specify a name in the Virtual Server Name field for the action to take effect.
Virtual Server Remove—Removes the virtual server that is selected in the Virtual Server Table. A
dialog box appears, asking you to confirm the action.
IP Address field—IP address of a virtual server restricted client range.
Netmask field—Subnet mask of a virtual server restricted client range. Enabled bits indicate
network addressing bits in the IP address.
The IP address and netmask must specify a unique client range on the virtual server. The netmask
must agree with the class of network address specified by the IP address.
Mode button—Indicates that the restricted client range defines clients that may not use the virtual
server. The client is excluded.
Client Add—Adds the client range to a virtual server definition. You need to specify a name in the
Server Farm Name field, an IP address in the IP Address field, and a subnet mask in the Netmask
field, and select a mode for the action to take effect.
Client Remove—Removes the client range to a virtual server definition.
Chapter 7 Module and Port Adapter Management
OL-4930-01