Distribution List Tab - Cisco WS-C3550-12G User Manual

BGP Management Window
•
•
•
•

Distribution List Tab

The Distribution tab of the BGP Management dialog consists of a single area, Distribution List Table. In
addition to this area, the following subarea is available: Edit Distribution List Table.
The Distribution List Table area describes filtering of routing updates sent or received by the routing
process.
•
•
•
•
Cisco Catalyst Switch Manager User Guide
11-30
IS-IS Routing Level—Indicates IS-IS route level redistribution. This field has the following values:
level-1—Local area/intra-area dedistribution.
–
– level-1-2—Redistribution for both inter and intra-area routing.
– level-2—Backbone/interarea redistribution (default).
Metric—BGP metric used to weigh the redistributed route. If no value is specified for Default Metric
(in the BGP tab), this value defaults to 0.
Add Redistribute—Enables route redistribution from another IP routing process into the BGP
routing domain. Routes may be learned from an IS-IS, EIGRP, or OSPF routing process.
Delete Redistribute—Disables route redistribution from another IP routing process into the BGP
routing domain.
ACL ID—Unique identifier of an ACL for filtering routing updates sent or received by a routing
process. The ACL specifies which network routes will be permitted or denied in routing updates.
This field has the following values:
<1-199>—Standard access list number.
–
– <1300-2699>—Expanded access list number.
– alphanumeric—Named access list.
Direction—Indicates whether the filter will be applied against routing updates received by the
routing process or advertised by the routing process.
– in—Applies to updates received.
– out—Applies to updates advertised.
Interface—Identifies a particular interface that the filter is applied to. For an incoming filter,
suppresses routing updates received on a specific interface; if not specified, routing updates are
suppressed on all interfaces. For an outgoing filter, suppresses routes from being advertised on a
particular interface; if not specified, route advertisements are suppressed on all interfaces.
– Null 0
– FastEthernet <slot>/<port> (Native IOS only)
– GigabitEthernet <slot>/<port> (Native IOS only)
GE-WAN <slot>/<port>
–
POS <slot>/<port>
–
ATM <slot>/<subslot>/<port>
–
Port-channel <n> (Native IOS only)
–
– VLAN <n>
Protocol—Identifies the routing protocol source of network routes.
Chapter 11 Routing Management
OL-4930-01