Vtp Management Window - Cisco WS-C3550-12G User Manual

VTP Management Window

VTP Management Window
The VTP Management window allows you to configure VTP domains on the switch or router. This
window can be launched from a Software object or VTP object within the Physical view.
To launch the VTP Management window, perform one of the following:
•
•
•
•
The following figure is an example of the VTP Management window.
Figure 10-1 VTP Management Window
You can choose more than one Software object at a time from the object list on the left side of the
window.
The following tabs are available on the VTP Management window:
•
•
Cisco Catalyst Switch Manager User Guide
10-2
Right–click a Site object within the Network or Physical containment views, then choose
CSM/7600 Manager > Logical > Software > Virtual Interface > VTP.
Right–click a Network Element object within the Network or Physical containment views, then
choose Logical > Software > Virtual Interface > VTP.
Right–click a Software object within the Physical containment view, then choose
Virtual Interface > VTP.
Right–click a VTP object within the Physical containment view, then choose VTP.
Details Tab
Additional Notes Tab
Chapter 10 Virtual Interface Management
OL-4930-01