Port Adapters; Software - Cisco WS-C3550-12G User Manual

Chapter 13 Alarms and Alarm Management

Port Adapters

The following table describes the Port Adapters state alarms.
Table 13-8 Port Adapters State Alarms
State
mismatched
normal
normallostcomms "C6576M Port Adapter is in the lostcomms
performance
perflostcomms

Software

The following table describes the Software object state alarms.
Table 13-9 Software Object State Alarms
State
discovery
discoverylostcomms "C6576M Software is in the
normal
normallostcomms
Note Because the Software object cannot enter the lostcomms state independently of the Network Element
object, no alarm is raised when the Software object enters the lostcomms state.
OL-4930-01
Description
"C6576M Port Adapter is in the mismatched
state. The discovered SFM card is different
from the pre-deployed or previously
discovered type."
"C6576M Port Adapter is in the normal state." Normal
state. Network connectivity to the supervisor
card is lost."
"C6576M Port Adapter is in the performance
state."
"C6576M Port Adapter is in the lostcomms
state. Network connectivity to the supervisor
card is lost."
Description
"C6576M Software is in the discovery
state. Discovery of the logical software
objects is being performed."
discoverylostcomms state. Network
connectivity to the switch has been lost
during discovery or the IOS passwords
are incorrect."
"C6576M Software object is in the
normal state."
"C6576M Software object is in the
lostcomms state. Network connectivity to
the supervisor card is lost."
Cisco Catalyst Switch Manager Alarms
Severity
Major
Normal
Severity Alarms Cleared
Informational normal
discovery
Normal discovery
Cisco Catalyst Switch Manager User Guide
Alarms Cleared
performance
lostcomms
performance
lostcomm
performance
lostcomms
13-31