Chapter 8
Interface and Subinterface Management
SONET Line Error Statistics
The SONET Line Error Statistics area contains the following information:
•
•
•
•
SONET Far End Line Error Statistics
The SONET Far End Line Error Statistics area contains the following information:
•
•
•
•
Routing Protocol Tab
The following areas are available on the Routing Protocol tab of the Channelized SONET Interface
Management window:
•
•
MPLS
The MPLS area provides the following information:
•
•
Note
•
OL-4930-01
Errored Secs—Number of errored seconds encountered by the SONET line in the current 15-minute
interval.
Severely Err Secs—Number of severely errored seconds encountered by the SONET line in the
current 15-minute interval.
Coding Violations—Number of coding violations encountered by the SONET line in the current
15-minute interval.
Unavailable Secs—Number of unavailable seconds encountered by the SONET line in the current
15-minute interval.
Errored Secs—Number of far end errored seconds encountered by the SONET line in the current
15-minute interval.
Severely Err Secs—Number of severely far end errored seconds encountered by the SONET line in
the current 15-minute interval.
Coding Violations—Number of far end coding violations encountered by the SONET line in the
current 15-minute interval.
Unavailable Secs—Number of far end unavailable seconds encountered by the SONET line in the
current 15-minute interval.
MPLS
ISIS
Status—Indicates whether MPLS routing is enabled or disabled. If MPLS is not supported on the
device, 'Not Applicable' displays.
Enable—Enables MPLS routing on the interface.
To enable MPLS on an interface, the user must specify an MPLS routing process that is already
deployed on the device. If the process does not exist, the action will fail.
Disable—Disables MPLS routing on the interface.
Channelized SONET Interface Management Window
Cisco Catalyst Switch Manager User Guide
8-59