Stp Tab - Cisco WS-C3550-12G User Manual

EtherChannel Management Window

STP Tab

The following areas are available on the STP tab of the EtherChannel Management window:
•
•
•
In addition to these areas, the STP tab provides the following information:
•
•
•
Figure 10-10 CCSM EtherChannel MST Config Window
Cisco Catalyst Switch Manager User Guide
10-28
Access Mode
Per VLAN STP Setting
STP Status
Guard Mode—Indicates whether or not STP guard mode is enabled on an interface. The possible
values are:
– root
– none
loop
–
PortFast Enabled—Indicates whether or not an interface is enabled to move directly to the
forwarding state on link up. This is a read-only attribute. Portfast can be configured on a trunking
interface, but it only has an effect when the interface is in access mode. The following are possible
values:
– true
– false
MST Configuration—Launches the CCSM EtherChannel MST Config window.
Chapter 10 Virtual Interface Management
OL-4930-01