Chapter 8
Interface and Subinterface Management
Figure 8-19 ATM/SONET Advanced Configuration Window
Layer 3
The Layer 3 area contains the following information:
•
•
•
OL-4930-01
You can select one chassis, more than one module, more than one port adapter, and more than one
interface at a time from the object list on the left side of the window.
The ATM/SONET Advanced Configuration window contains one area named General.
General:
Local Proxy ARP—Indicates the status of local proxy ARP on the selected interface, enabled
–
or disabled.
IP Address—Displays the IP address of the Layer 3 interface.
Netmask—Subnet mask of the interface IP address. Enabled bits indicate the network addressing
bits in the IP address.
Clear IP Address button—After receiving confirmation, will remove the IP address setting for this
interface.
ATM/SONET Interface Management Window
Cisco Catalyst Switch Manager User Guide
8-65