4K Details Tab; Inventory; Status - Cisco WS-C3550-12G User Manual

Chapter 7 Module and Port Adapter Management

4k Details Tab

This tab is intended for use with Catalyst 4000 series switches. If you select a module within a device
Note
other than a Catalyst 4000 series switch from the listings on the left–hand side of the window, the 4k
Details tab is inactive (i.e., grayed out). Review the
within a device other than a Catalyst 4000 series switch.
The following areas are available on the 4K Details tab of the Supervisor Module Management window:
•
•

Inventory

The Inventory area provides the following information:
•
•
•
•
•
•

Status

The Status area provides the following information:
•
•
OL-4930-01
Inventory
Status
Description—Provides a brief description of the module selected.
Serial Number—Displays the serial number of the module selected, when available.
Model—Displays the model name of module selected.
Software Version—Indicates the software version on the module.
Hardware Version—Indicates the hardware version on the module.
Firmware Version—Indicates the firmware version on the module.
Operational Status—Displays the operational status of the module. This field has the following
values:
OK
–
Other (unknown)
–
Minor Fault
–
– Major Fault
Administrative Status—Displays the administrative status of the module. This attribute can have one
of the following values:
– Enabled
– Disabled
– Reset
Out of Service
–
Admin
–
Supervisor Module Management Window
Details Tab instead for information on modules
Cisco Catalyst Switch Manager User Guide
7-5