Cisco WS-C3550-12G User Manual page 292

QoS Management – Configuration Window
Figure 9-10 QoS Management—Add Aggregate Window
The following is displayed on the QoS Management—Add Aggregate window:
–
–
–
–
–
• Remove Policer—Deletes one or more aggregrate policers on the managed device selected in the
Named Policers table.
Cisco Catalyst Switch Manager User Guide
9-28
Name—Unique identifier of a named aggregate policer on the managed device.
Rate—Maximum transmission rate (in bits per second) to enforce against the policed traffic.
Burst—Normal burst size in bytes to enforce against the policed traffic.
Exceed Action—Action to be taken when traffic exceeds QoS parameters on
Cisco Catalyst 3550 series devices (only). This attribute has one of the following values:
Drop—Drops packet. This value is only applicable to Cisco Catalyst 3550 series devices.
Policed DSCP Transmit—Changes the DSCP as per the policed DSCP map before transmitting.
This value is only applicable to Cisco Catalyst 3550 series devices.
Transmit—Transmits packet. This value is only applicable to Cisco Catalyst 3550 series
devices.
None—Indicates that an exceed action has not been specified. This value is applicable to all
device types.
Add—Creates the policer instance.
Chapter 9 Software Management
OL-4930-01