Chapter 11
Routing Management
Redistribution Tab
The Redistribution tab of the BGP Management dialog consists of a single area, Redistribution Table. In
addition to this area, the following subareas are available:
•
•
The Redistribution Table area describes the route redistribution configuration of the BGP routing
process. Routes learned from other interior and exterior routing protocols may be redistributed into the
BGP routing domain.
•
•
•
•
Default Metric
The Default Metric subarea provides the following information:
•
Edit Redistribution Table
This area allows changes to be made to the attributes shown in the Redistribution Table. These attributes
are discussed in detail in the
•
•
OL-4930-01
Default Metric
Edit Redistribution Table
Protocol—Source protocol from which routes are being distributed into BGP.
IS-IS
–
EIGRP
–
–
OSPF
AS/Tag—The autonomous system tag identifying the BGP routing domain.
IS-IS Routing Level—Indicates IS-IS route level redistribution. This field has the following values:
–
none—For protocols other than IS-IS.
level-1—Local area/intra-area dedistribution.
–
level-1-2—Redistribution for both inter and intra-area routing.
–
level-2—Backbone/interarea redistribution (default).
–
Metric—BGP metric used to weigh the redistributed route. If no value is specified for Default Metric
(in the BGP tab), this value defaults to 0.
Default Metric—Default metric used for route redistribution. This metric is used when and explicit
metric is not given during route redistribution process.
Redistribution
Protocol—Source protocol from which routes are being distributed. This attribute along with Source
ID uniquely identifies a source of network paths to be redistributed through BGP. There may be, at
most, one redistribution entry for a given source of network path information.
isis
–
eigrp
–
–
ospf
–
static
–
connected
–
static and connected
AS/Tag—The autonomous system tag identifying the BGP routing domain.
Tab.
Cisco Catalyst Switch Manager User Guide
BGP Management Window
11-29