Vlan Management Window - Cisco WS-C3550-12G User Manual

VLAN Management Window

VLAN Management Window
The VLAN Management window provides attributes for VLAN configurations. This window can be
launched from the Software object or VLAN object in the Physical view.
To launch the VLAN Management window, perform one of the following:
•
•
•
•
The following figure is an example of the VLAN Management window.
Figure 10-3 VLAN Management Window
You can choose only one Software object and one VLAN object at a time from the object list on the left
side of the window.
The following tabs are available on the VLAN Management window:
•
•
•
Cisco Catalyst Switch Manager User Guide
10-8
Right–click a Site object within the Network or Physical containment views, then choose
CSM/7600 Manager > Logical > Virtual Interface > VLAN.
Right–click a Network Element object within the Network or Physical containment views, then
choose Logical > Virtual Interface > VLAN.
Right–click a Software object within the Physical containment view, then choose
Virtual Interface > VLAN.
Right–click a VLAN object within the Physical containment view, then choose VLAN.
Status Tab
Configuration Tab
VLAN Membership Tab
Chapter 10 Virtual Interface Management
OL-4930-01