Actions; Performance Tab; Statistics; Additional Notes Tab - Cisco WS-C3550-12G User Manual
User guide
Hide thumbs
Also See for WS-C3550-12G:
- Software configuration manual (798 pages) ,
- Manual (278 pages) ,
- Datasheet (19 pages)
Table of Contents
Advertisement
Chapter 7
Module and Port Adapter Management
Actions
The Actions area provides the following actions:
•
•
Performance Tab
The Statistics area makes up the Performance tab of the Switch Fabric Module Management window.
Statistics
The Statistics Table of the Statistics area provides the fabric channel counters and utilization for the
device. There is an entry in this table for each fabric-enabled module installed in the chassis.
•
•
•
•
•
•
•
This table is only supported in IOS versions 12.1(8a)EX and later; in earlier IOS versions, the table will
Note
be empty.
Additional Notes Tab
The Additional Notes tab of the Switch Fabric Module Management window contains the Notes area
which is a text box that allows you to type in additional notes for the Switch Fabric Module.
OL-4930-01
Commission—This button is used to commission the object manually. This can only be done if the
object is in a decommissioned state.
Decommission—This button is used to decommission the object manually. In the decommissioned
state, the properties of the object are not monitored. As a result, data displayed in the configuration
window is not guaranteed to be current.
The decommission action allows a Switch Fabric Module to be removed and replaced without
generating alarms.
Slot—Slot number of the fabric-enabled module.
Channel—Fabric channel number.
In Errors—Total number of error packets received on the module through the fabric channel since
the entry was last initialized.
Out Errors—Total number of error packets transmitted on the module through the fabric channel
since the entry was last initialized.
Out Dropped—Total number of dropped packets transmitted on the module through the fabric
channel since the entry was last initialized.
In Util—Input utilization of the fabric channel for the module.
Out Util—Output utilization of the fabric channel for the module.
Switch Fabric Module Management Window
Cisco Catalyst Switch Manager User Guide
7-15
Advertisement
Table of Contents
Troubleshooting
