Interface Error Statistics; Dx3 Current Table; Dx3 Far End Current Table - Cisco WS-C3550-12G User Manual

ATM/E3 Interface Management Window

Interface Error Statistics

The Interface Error Statistics area contains the following information:
•
•
•
•
•
•
•
•
•

Dx3 Current Table

The DX3 Current Table area contains the following information:
•
•
•
•
•
•
•
•
•
•

Dx3 Far End Current Table

The DX3 Far End Current Table area contains the following information:
•
•
•
•
•
Cisco Catalyst Switch Manager User Guide
8-90
CRC Error Pkts.—Number of input packets which had cyclic redundancy checksum errors.
In Discarded Pkts.—The number of inbound packets that were chosen to be discarded even though
no errors had been detected to prevent them from being deliverable to a higher-layer protocol. One
possible reason for discarding such a packet is to free up buffer space.
Out Discarded Pkts.—The number of outbound packets which were chosen to be discarded even
though no errors had been detected to prevent their being transmitted. One possible reason for
discarding such a packet could be to free up buffer space.
In Dropped Pkts.—The number of packets dropped because the input queue was full.
Out Dropped Pkts.—The number of packets dropped because the output queue was full.
In Ignored Pkts.—Number of input packets that were simply ignored by this interface.
In Aborted Pkts.—Number of input packets that were aborted.
In Error Pkts.—The number of inbound packets that contained errors preventing them from being
delivered to a higher-layer protocol.
Out Error Pkts.—Number of outbound packets that could not be transmitted because of errors.
C-bit Errored Secs—C-bit errored seconds.
C-bit Severely Err Secs—C-bit severely errored seconds.
C-bit Coding Violations—C-bit coding violations.
P-bit Errored Secs—P-bit errored seconds.
P-bit Severely Err Secs—P-bit severely errored seconds.
P-bit Coding Violations—P-bit coding violations.
Line Errored Secs—Line errored seconds.
Line Coding Violations—Line coding violations
Unavail Secs—Unavailable seconds.
Severely Err Frm Secs—Severely errored framing seconds.
C-bit Errored Secs—Far end C-bit errored seconds.
C-bit Severely Err Secs—Far end C-bit severely errored seconds.
C-bit Coding Violations—Far end C-bit coding violations.
Elapsed Secs—Number of seconds that have elapsed since the beginning of the far end current
error-measurement period.
Unavail Secs—Far end unavailable seconds.
Chapter 8 Interface and Subinterface Management
OL-4930-01