General; Layer 2 - Cisco WS-C3550-12G User Manual

ATM/E3 Interface Management Window

General

The General area contains the following information:
•
•
•
•
Note
•
Note

Layer 2

The Layer 2 area contains the following information:
•
•
•
Cisco Catalyst Switch Manager User Guide
8-86
Link Up/Down Trap—Enables or disables linkUp and linkDown trap generation for the interface.
Max. Input Queue Length—Input queue length in packets.
Max. Output Queue Length—Output queue length in packets.
Delay—Specifies the delay in tens of microseconds for an interface or network segment.
The Delay attribute is an informational parameter used only to communicate the current
bandwidth to the higher-level protocols (such as IGRP and EIGRP); you cannot adjust the actual
delay of an interface with this command.
Bandwidth—Overwrites default bandwidth in kilobits per second.
The Bandwidth attribute is an informational parameter used only to communicate the current
bandwidth to the higher-level protocols (such as IGRP, EIGRP, and OSPF); you cannot adjust
the actual bandwidth of an interface with this command.
MAC Address—Displays the MAC address of the interface.
MTU—The size of the largest packet which can be sent/received on the interface, specified in octets.
Advanced Features—Launches the ATM/E3 Advanced Configuration window.
Chapter 8 Interface and Subinterface Management
OL-4930-01