Chassis Layer2/Layer3 Management Window
Chassis Layer2/Layer3 Management Window
The Chassis Layer2/Layer3 Management window provides capabilities to enable or disable
Cisco discovery, unidirectional, LAN and IP routing protocols on the network element.
To launch the Chassis Layer2/Layer3 Management window, perform one of the following:
•
•
The following figure is an example of the Chassis Layer2/Layer3 Management window.
Figure 5-1
The Chassis Layer2/Layer3 Management window includes the following areas:
•
•
Cisco Catalyst Switch Manager User Guide
5-2
Right–click a Site object within the Network or Physical containment views, then choose
CSM/7600 Manager > Chassis Mgmt–IP.
Right–click a Network Element object within the Network or Physical containment views, then
choose Chassis Mgmt–IP.
Chassis Layer2/Layer3 Management Window
Layer 2 Configuration
Layer 3 Configuration
Chapter 5
Network Element Management
OL-4930-01