Pos Subinterface Management-Configuration Window - Cisco WS-C3550-12G User Manual

Chapter 8 Interface and Subinterface Management
POS Subinterface Management—Configuration Window
The POS Subinterface Management—Configuration window describes a logical OC-3 channel on a
channelized OC-12 (ChOC-12) or OC-48 (ChOC-48) SONET interface of an Optical Service Module
(OSM). An OC-3 channel of a SONET interface is provisioned as a logical packet over SONET (POS)
interface. This window can be launched from the OSM Channelized SONET Module or Interface object
or the POS Subinterface within the Physical view.
To launch the POS Subinterface Management—Configuration window, perform one of the following:
•
•
The following figure is an example of the POS Subinterface Management—Configuration window.
Figure 8-27 POS Subinterface Management—Configuration Window
You can select multiple OSM POS subinterfaces, OSM Channelized SONET interfaces, OSMs, and
chassis at a time from the object list on the left side of the window.
OL-4930-01
Right–click a Network Element object within the Network or Physical containment views, then
choose CSM/7600 Manager > Physical > Subinterface > OSM POS.
Right–click a Chassis object within the Network or Physical containment views, then choose
Physical > Subinterface > OSM POS.
POS Subinterface Management—Configuration Window
Cisco Catalyst Switch Manager User Guide
8-107