Status - Cisco WS-C3550-12G User Manual

Chassis Management Window

Status

The Status area provides the following information:
•
Note
•
Note
•
•
•
•
Cisco Catalyst Switch Manager User Guide
6-4
Firmware version
–
Software version
–
Core Temperature Status—Status of the core of the chassis. This attribute can have the following
values:
– Excessive—The current temperature is within normal operating parameters.
– Normal—The current temperature has exceeded the normal operating range.
– High—The current temperature is dangerously high. The system will shutdown imminently.
If this attribute has a value other than off, an alarm is generated.
Fan Status—Status of the chassis fans. This attribute can have the following values:
other—The fan status is unknown.
–
Normal—Fan status is normal.
–
– High—There is a minor problem.
– Excessive—There is a major problem.
If this attribute has a value other than ok, an alarm is generated.
Clock 1 Status, Clock 2 Status—Operational statuses of clocks 1 and 2. These attributes can have
the following values:
– OK—Clock is operating.
– failed—Clock is not operating.
Clock 1 In Use, Clock 2 In Use—Indicates which clock is in use. These attributes can have the
following values:
in-use—Clock is in use.
–
not-in-use—Clock is not in use.
–
VTT 1 Status, VTT 2 Status, VTT 3 Status—Operational status of VTT 1, VTT 2, and VTT 3. These
attributes can have the following values:
OK—VTT is operating.
–
failed—VTT is not operating.
–
VTT 1 Outlet Temperature, VTT 2 Outlet Temperature, VTT 3 Outlet Temperature—Outlet
Temperatures of VTT 1, VTT 2, and VTT 3. These attributes can have the following values:
– <n>C—Temperature in degrees Celsius.
– N/O—Indicates that the sensor is not operational.
– N/A—Indicates that the sensor value is not available.
Chapter 6 Chassis Management
OL-4930-01