ATM/SONET Interface Management Window
You can select multiple ATM/SONET interfaces, port adapters, FlexWAN modules, and chassis at a time
from the object list on the left side of the window.
The following tabs are available on the ATM/SONET Interface Management window:
•
•
•
•
•
•
Status Tab
The following areas are available on the Status tab of the ATM/SONET Interface Management window:
•
•
•
Interface Status
The Status area provides the following information to describe the general characteristics of the
interface:
•
•
•
•
Cisco Catalyst Switch Manager User Guide
8-62
Status Tab
Configuration Tab
ATM/SONET Tab
Performance Tab
Routing Protocol Tab
Additional Notes Tab
Interface Status
ATM/SONET
Performance Logging
Index—String index of the interface. This attribute is read-only.
Description—Comment or a description to help you remember what is attached to this interface. The
description is only put in the configuration to help you remember what specific interfaces are used
for.
Operational Status—The current operational state of the interface. This attribute is read-only. This
attribute has one of the following values:
–
testing—Indicates that no operational packets can be passed.
–
unknown
–
down
–
up
dormant—Interface is waiting for external actions (such as a serial line waiting for an incoming
–
connection)
–
notPresent—Interface has missing (typically, hardware) components.
lowerLayerDown—The interface in the lower layer is down.
–
Administrative Status—The desired state of the interface. This attribute has one of the following
values:
testing (read-only)—Indicates that no operational packets can be passed.
–
up
–
down
–
Chapter 8
Interface and Subinterface Management
OL-4930-01