Redistribution Tab - Cisco WS-C3550-12G User Manual

EIGRP Management Window

Redistribution Tab

The Redistribution tab of the EIGRP Management dialog consists of a single area, Redistribution Table.
In addition to this area, the following subareas are available:
•
•
The Redistribution Table area describes the route redistribution configuration of the EIGRP routing
process. Routes learned from other interior and exterior routing protocols may be redistributed into the
EIGRP routing domain.
•
•
•
•
•
•
•
•
Cisco Catalyst Switch Manager User Guide
11-18
Metric Default
Edit Redistribution Table
Protocol—Source routing protocol from which routes are being distributed into EIGRP.
IS-IS
–
EIGRP
–
– BGP
– OSPF
– static
Source ID—Identifies the routing process from which routes are being distributed. This field may
have the following values:
– IS-IS—This is either an implicit null tag or the tag of a named IS-IS routing process.
EIGRP—This is a 16-bit autonomous system ID in the range of 1..65535
–
BGP—This is a 16-bit autonomous system ID in the range of 1..65535
–
OSPF—This is a 16-bit OSPF process ID in the range of 1..65535
–
IS-IS Routing Level—Indicates IS-IS route level redistribution. This field has the following values:
– none—For protocols other than IS-IS.
– level-1—Local area/intra-area redistribution.
– level-1-2—Redistribution for both inter- and intra-area routing.
– level-2—Backbone/interarea redistribution (default).
Bandwidth—Bandwidth metric. This redistribution metric must be specified for protocols other than
EIGRP if the Default Metric in the Details tab is nil.
Delay—Delay metric. This redistribution metric must be specified if the Default Metric is nil.
Reliability—Reliability metric. 0 is least reliable, 255 is 100 percent reliable. This redistribution
metric must be specified if the default metric is nil.
Loading—Loading metric. This indicates the effective bandwidth of the network paths where 0 is
least loaded and 255 is 100 percent loaded. This redistribution metric must be specified if the
Default Metric is nil.
MTU—Maximum transmission unit of the path metric. This redistribution metric must be specified
if the Default Metric is nil.
Chapter 11 Routing Management
OL-4930-01