Setting Up Rollover Lines; Setting Up Reach Me Anywhere - Cisco IE-3000-8TC Administration Manual

• In the Usage Profiles page in the Cisco Business Edition 3000 Administrative Interface. Select
Step 4 If you did not add the phone configuration directly to the usage profile, select it in the usage profile (move
from the Available section to the Selected section).
Step 5
Verify that the usage profile is applied to the user configuration. In the Cisco Business Edition 3000
Administrative Interface, select Users/Phones > Users.
Step 6 Verify that the phone displays the phone application. Test that the phone application works.

Setting Up Rollover Lines

Perform the following procedure to set up rollover lines.
Procedure
Step 1
If you have not already done so, create the user and assign the extension to the user. Assign a usage profile
where the phone button template has at least two lines assigned to it.
Step 2 If you have not already done so, add the phone configuration. Make sure that line 1 in the phone configuration
uses the extension from the user. In the phone configuration, make sure that you assign the same extension
from the user to one of the other lines in the prioritized list.
Step 3 Verify that the phone displays the same extensions. If the same extensions do not display, verify that the phone
button template in the assigned usage profile has at least two lines assigned to it. Verify that the phone model
supports two lines.

Setting Up Reach Me Anywhere

To enable a user access to the Reach Me Anywhere setting in the Cisco Business Edition 3000 User Preferences
Interface, perform the following procedure:
Procedure
Step 1 Enable Reach Me Anywhere in the usage profile.
Step 2 Assign the usage profile to the user. Assign an extension to the user.
Step 3 Add the phone, if it has not already been added to the Cisco Business Edition 3000 Administrative Interface.
Step 4
Assign the extension to Line 1 on the phone. The user ID displays in the owner field in the Phone page after
you assign the extension.
Tip
OL-27022-01
Users/Phones > Usage Profile. Make sure that you move it to the Selected section after you add the
configuration.
The Reach Me Anywhere setting does not display in the Cisco Business Edition 3000 User Preferences
Interface if the usage profile that is assigned to the user has Reach Me Anywhere disabled.
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
Setting Up Rollover Lines
149