Cisco IE-3000-8TC Administration Manual page 363

Field
Emergency Location ID Numbers (ELINs)
PSTN Access Information
Note
Route all calls from this site through the same
connection group
Route calls from this site through different
connection groups based on Outside Dial
Code
OL-27022-01
When you change the PSTN call routing options, the system saves the configuration before allowing
you to view or edit the dial plan patterns. A progress bar indicates the status of saving the new
PSTN access option. If you refresh or open a new browser window to access the Administrative
interface while the site configuration is being updated, a message displays that the system update
is currently in progress and the administrative interface will not be available until the update is
completed.
Description
Enter the emergency location ID number within your
respective site or location.
To add multiple emergency location ID numbers, ensure that
you separate each ELIN with commas.
For the emergency services to correctly identify
Caution
the site location as the source of emergency calls,
you must specify at least one ELIN. This ELIN
phone number must be unique to a site and be
registered with its location.
Select this option to automatically route all the calls from this
site through the same connection group.
From the drop-down list, select the connection group through
which all the calls from this site will be routed.
Click View Dial Plan Patterns to view the configured dial
plan patterns. See Dial Plan Pattern Settings, on page 355
more information about configuring Dial Plan Patterns.
Select this option to automatically route all the calls through
different connection groups based on the Outside Dial Code
dialed when making the call.
From the drop-down list, select the connection group through
which all the calls from this site will be routed for each outside
dial code.
This option is not available for a single outside dial
Note
code configured on System Settings > Dial Plan >
General > Dialing Prefixes area.
Click View Dial Plan Patterns to view the configured dial
plan patterns. See Dial Plan Pattern Settings, on page 355
more information about configuring Dial Plan Patterns.
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
Configure Remote Site
for
for
343